Table Hardware

Sag Proof Wood Slides A table equipped with Wabash hardwood slides will never sag. The slides are designed with an engineered arc to provide constant leveling when the table is fully extended and leaves are in place. Precision built, they are smooth and quiet operating. Sold in sets of two Screws not included Note: Second Day and Next Day shipments of table slides will be billed actual shipping cost due to being oversize and extra heavy. The shopping cart will not figure the shipping price correctly, but we will adjust it on our end. We can provide a shipping quote by request before you order them.
	30" long when closed. 38" opening when extended, will take three twelve inch leaves. W-5107 $52.50
	36" long when closed. 62" opening when extended, will take five twelve inch leaves. W-5109 $99.90
	Pedestal Equalizer Table Slides Opening or closing one side automatically opens or closes the opposite side through a reciprocating steel gear mechanism. For pedestal tables only. Sold in sets of two Screws not included 26" long when closed 25" opening when fully extended Will take two twelve inch leaves. W-5121 $55.10

Table Pins and Levelers

	1 1/4" long by 3/8" Diameter. Hardwood Sold by the dozen W1-5100 $.74 per dozen
	5/16' diameter. Socket - 3/8" long Half with pin - 11/16" overall. Brass plated steel. Sold by the dozen D-5101 $5.54 per dozen
	Table Top Leveler 2 1/8" long by 3/4' wide. Plain steel Sold by the dozen S-5102 $2.14 per dozen

Table Top Fasteners

	1 1/4" long by 3/4" wide. Long side - 3/4" long Offset - 3/8" Plain steel Sold per each. Sold by the dozen S-5112 $3.44 per dozen
	1 5/16" long Small end - 5/8" wide Large end - 3/4" wide Plain steel, good for desk or dresser as well. Sold by the dozen S-5182 $3.18 per dozen

Table Locks

	Pull rod table lock. 18" long plain steel. S-5127 $3.80
	Latch base - 2 5/16" long by 1 3/8" wide. Catch base - 2 1/4" long by 9/16" wide. Cam type- Brass plated steel D-5143 $2.98
	Self leveling table lock. Latch base - 3" long by 1 3/8" wide. Catch base - 1 15/16" long by 1 13/16" wide. Cam type - plain steel. S-5142 $4.80

Drop Leaf Supports

3 pc. Cast Iron Set
Forked Bar 10" long. Forked end hooks through piece that attaches to the outside of the table apron. Other end clamped to underside of drop leaf with the smaller capped piece. When the table leaf is raised, the forked end locks into place. Release by squeezing the forked pieces.

F-5140 $17.00

These sturdy supports are precision built from heavy gauge steel. Positive quick action when correctly installed. Plain Steel

Mounting distance "B" when "A" is:

Click to enlarge

	"A"	1/2"	1"	1 1/2"	2"	2 1/2"	3"
8"	"B"	2 13/16"	2 1/2"	2 1/8"	1 11/16"	1 3/16"	-
10"	"B"	4 1/4"	4"	3 9/16"	3 1/4"	2 13/16"	2 3/8

Drop leaf table hinge

3 1/8" long by 1 7/16" wide Short leaf - 1 3/8" long Long leaf - 1 3/4" long. Short leaf attaches to the table and long leaf attaches to the drop leaf.

CORNER BRACKETS 4 5/8" long x 2"w Heavy Gauge Steel Screws NOT included.

S-2771 $2.80

Lazy Susan Turntables

	Square type 3" Square Load capacity - 200 pounds. Turn table size - up to 18". S-5161 $2.36
	4" Square Load capacity - 300 pounds. Turn table size - 12" to 25". S-5171 $3.20
	6"Square Load Capacity - 500 pounds. Turn table size - 15" to 30". S-5181 $5.38
	Round Type 9" round. Load Capacity - 750 pounds. Turntable size - 18" to 35". S-5186 $8.90
	12" round Load Capacity - 1000 pounds. Turntable size - 20" and over. S-5191 $13.90
10% Discount on Orders $50.00 or More.

FURNITURE KNOWLEDGE!

17012 Dwyer Road * Bonner Springs, KS 66012

Toll Free: 1-888-498-4345 * Local: 913-728-2053 * Fax 913-728-2055

Site Map / About Us / Customer Service / Ordering Information / Privacy Policy / Terms & Conditions


		100% Secure Shopping
	Search Our Site
Toll Free 1-888-498-4345
Home * Ordering Information * Products * Tips * Useful Links			Email Us
Table Hardware