Pre-woven cane webbing and Spline

Home   I   Back   I   Products   I  Links  I   Furniture Tips    I   E-mail

      
Books and Videos  Hand Caning Kits Binder Cane
Caning tools Flat Reed Splint Flat Oval Reed
Art Fiber Flat Seating  Rush  Seagrass
Danish Cord Shaker Tape Stains & Finishes for Cane
Spline Pre-woven Cane Cane by the hank

Ordering information (Terms and Conditions)

Click Here  To Learn How!

How to measure: To determine what size open mesh cane to order, measure one "pattern repeat". The example below shows how the 7/16 open mesh is measured. If in doubt about the size, send a 2"x 2" sample of your cane and some spline.

 

Click images to enlarge them.

Fine half inch open mesh is the most standard size.

 I now stock the cane in 12" to 30" wide rolls.

The cane webbing is priced per linear inch.  We will cut you a single sheet depending on how many inches you order, so if you need a single piece that is 36 inches by 18 inches, you would find the roll that is 18 inches wide and replace the number one in the white field with a number 36

The spline you will need to install it, is ordered separately below and is sold by the foot.

Pre-Woven cane

3/8" 12" Wide  R-8112   $.40   
3/8"  14" wide   R-8114  $.46  
3/8"  16" wide   R-8116   $.52  
3/8"  18" Wide  R-8118  $.60   
3/8"  24" Wide  R-8124 $.80  

 

7/16"    12" Wide  R-8212  $.36  
7/16"   14" Wide  R-8214  $.42  
7/16"   16" Wide   R-8216   $.48 
7/16"   18" Wide  R-8218  $.54  
7/16"  24" Wide    R-8224 $.74 

 

1/2"   12" Wide    R-8312  $.34  
1/2"   14" Wide    R-8314  $.37  
1/2"   16" Wide    R-8316  $.46  
1/2"   18" Wide   R-8318  $.50  
1/2"  20" Wide   R-8320    $.58 
1/2"  24" Wide   R-8324  $.70
1/2" 30" Wide   R-8330   $.88

 

5/8"  14" Wide   R-8414  $.40 
5/8" 16" Wide   R-8416  $.44 

5/8"  18" Wide  R-8418  $.50 

5/8"  24" Wide  R-8424  $.68 

 

3/4" 24" Wide  R-8524 $.68  

 

1"  24" Wide    R-8624  $.68  

 

W-8399.jpg (4447 bytes) Replacement Back for Breuer Style Chair
Overall - 18 1/4"wide x 9 7/8"high x 1"thick
Caned Area - 16 3/4"wide x 8 3/4"high
Frame made of Rubberwood with Fine - 1/2"Open Mesh Cane Webbing already installed. Just remove the old curved back and replace with this standard unit. Back NOT bored for installation.

W-8399 $27.00

 
W-8398.jpg (6349 bytes) Replacement Seat for Breuer style Chair
Overall - 18 3/16"wide x 15 3/4"deep x 1"thick
Caned Area - 17"wide x 13 7/8"deep
Frame made of Rubberwood with Fine - 1/2"Open Mesh Cane Webbing already installed. Just remove the old seat and replace with this standard unit. Seat NOT bored for installation.

W-8398 $33.30

 
R-8724.jpg (8883 bytes)

Fine Radio Net     24" wide 

     R-8724  $.74    

R-8816.jpg (3907 bytes)

Medium Close woven (by the inch)          

16" Wide  R-8816  $.44

        

18" Wide  R-8818  $.50 

           

24" Wide  R-8824  $.68   

R-8874.jpg (5115 bytes) Fine Herringbone weave  24" wide  R-8874  $.76
 
R-8974.jpg (7553 bytes) Medium Modern Weave 24" wide. Repeat pattern is 7/16"  R-8974  $.66
 
R-8918.jpg (8679 bytes) Medium Modern Danish Weave 24"width. Repeat pattern is 1/2"  R-8924 $.74
 
R-8674.jpg (8732 bytes) Star Pattern Pre-woven Cane Webbing - 24" Wide
Woven with Fine/Fine and Fine Strand Cane through 5mm Binder Cane. Distance between the horizontal Binder strands is approximately 3/4". NOTE: Requires large groove for installation.

R-8674 $.80

 
R-8895.jpg (6063 bytes) NEW Herringbone Hand-woven Mat

44" x 72" with Finished Edges
Herringbone Pattern made with Narrow Medium strand cane

R-8895 $122.40

 

Spline

You will need spline to hold the cane to the chair. Here are the standard sizes. You will need to measure the width of the groove. It is important that you pick the closest size. 

Just as a reference, 3/16" is the same as 12/64ths or 6/32nds.  

The cost of the spline is .24 cents per foot, and is sold by the foot.

Number Size Item #  
6.5 7/64 R-8006.5
7.5 9/64 R-8007.5
8 5/32 R-8008
8.5 11/64 R-8008.5
9 13/64 R-8009
9.5 7/32 R-8009.5
10 15/64 R-8010
10.5 17/64 R-8010.5
11 18/64 R-8011

Spline removing chisel

Comes in 1/8" S-7940 or 3/16"S-7941. A must have! $15.50 each.

 
Sizes  

 

W-7930.jpg (3968 bytes)

Caning  Wedges

Four are used to hold it in place while you use the fifth one to push it into the groove. You may need to trim down the four to get a firm hold when pounded in depending on your groove width and depth.

4 1/2" Long x 1 1/2" wide.       Sold in lots of five.

W-7930  $3.70       

Home  I  Back  I  Products  I  Links  I   Furniture Tips  I  E-mail    

Furniture Knowledge 

17012 Dwyer Rd. Bonner Springs, KS 66012

1-888-498-4345

 

Copyright ©1999-2000-2001-2002-2003-2004 FurnitureKnowledge.com.  All rights reserved.