 |
Overall - 3 5/8" high by 1" wide
Outer flap - 2 1/2" high by 3/4" wide
Inside flap - 1 5/16" high by 1/2" wide
No Mortise - Fast Installation - Leaves only a 1/16" gap
$2.06 Each
AD-1701 Statuary Bronze Finish
D-1701 Brass Plated
|
 |
Overall - 3 9/16" high by 1 5/8" wide
Each flap - 2 1/2" high by 5/8" wide.
Steel with antique brass finish
|
 |
3 3/4" High by 1 7/8" Wide
Flush Mount
Polished Solid Brass
|
|
English Butler Tray Hinge Overall - 2
1/2" long by 1 1/2" wide Holds leaf vertical at a 90 degree angle.
Locks open in the flat position.
Solid Brushed
Brass
|
 |
English Butler Tray Hinge Overall - 3" long by 1 1/2" wide Holds leaf vertical at a 90 degree angle. Locks open in the flat position.
Solid
Brushed
Brass
|
|
Steel DROP FRONT DRAWER STAY with Statuary Bronze Finish
Dimensions when open: 7-1/4"long x 3/4"wide x 3/32"thick
For use on Drawers or Slant Front Secretaries ~ Reversible for Right Hand or Left Hand Mounting
NOTE: These support hinges are manufactured to open to less than 180 degrees to allow for the application of load which stretches the hinge to approach 180 degrees when installed instead of sagging past the 180 degree mark. Available in two finishes
Bright Brass D-1758 $5.40 each
Antique Brass AD-1759 $5.40 each
|
 |
Double acting folding screen hinges
Precision made folding brass plated steel hinges open in two
directions.
D-1718 for 3/4" thick panels 1 3/4" long .058 Steel $1.58
each
D-1728 for 1" to 1 1/8" panels 2" long
.058 Steel $1.88 each
D-1738 for 1 1/8" to 1 1/4" panels 2 1/8"
long .058 Steel $2.34 each
|
| 10% Discount on Orders $50.00 or More. |
