Briwax cleans and conditions wood, metal, fiberglass, marble, and tile. It helps your furnishings retard oxidation, tarnish, mold and mildew. It stains, seals, and finishes new wood in one easy step and leaves a beautiful wax finish.  Contains Toluene.

Due to freight restrictions, this item can only be shipped via UPS ground service only.    

Briwax 2000 features the same great finish but uses mineral Spirits instead of toluene which is safer on lacquer finishes. Tudor brown is only available in the regular Briwax. (Due to freight restrictions, this item can be shipped via UPS Ground Service only)

16 Ounce Can      $16.50 Each

J-3453 $11.00

 Shellac Sanding Sealer

      A fine quality natural sealer blended from bleached waxy grade shellac and metallic soaps. It provides a good base which gives a high build and a more resilient finish to French polish or wax. (Due to freight restrictions, this item can be shipped via UPS Ground Service only)

Furniture cleaner is a reviver for French polished or shellacked surfaces. It cleans off the dust and dirt and old waxes, while leaving the patina unharmed. It also takes off paint scuff marks.  Directions: Shake well before use. Apply liberally using #OOOO Steel wool ensuring that the steel wool is never dry. Rub gently with the grain. This will loosen the surface dirt which can then be wiped off the surface with a clean dry cloth. Repeat if necessary. Always try a test area first. (Due to freight restrictions, this item can be shipped via UPS Ground Service only)

Manufactured to a traditional formulation using only refined natural beeswax, linseed oils, and genuine turpentine. Beeswax can be used to clean and revive the natural color of wood and enrich the patina of the finest furniture. Directions: Apply with a soft cloth to a small area at a time, working with the grain. Polish off immediately with a soft cloth to produce a deep rich sheen. (Due to freight restrictions, this item can be shipped via UPS Ground Service only)

A specially prepared blend of natural waxes that will clean and leave a soft sheen to marble, quarry tiles and terra-cotta. Directions: Apply with a brush or clean rag, or #oooo steel wool. Allow it to dry then buff it to a soft sheen.

 Please note: Natural waxes are liable to mark when they come in contact with water. Be very careful if applying to steps or floors, as a wax can be very slippery especially with a loose rug over it. (Due to freight restrictions, this item can be shipped via UPS Ground Service only)

A smooth paste wax formulation to produce a white grained finish to bare or stained wood. Two hundred years ago this liming method was used to lighten the dark wood panels in various mansions of the day. Liming wax is the predecessor of the "pickling method" used today. Liming produces a distinctive effect, which is traditionally associated with oak furniture. The finish is created by filling deep pours in open grain timber with the liming wax. Even when dry, the white liming wax contrasts with the darker wood, emphasizing the grain pattern. Liming wax can be applied directly to bare wood and onto sealed surfaces. (Due to freight restrictions, this item can be shipped via UPS Ground Service only)

Surfaces for staining should be sanded as smooth as possible prior to staining. Apply the dyes directly by rag to the bare wood. Work the color over the surface to ensure an even color. Do not pour dye onto the surface, as this may cause a darker area which will be difficult to remove. Allow to dry completely before starting the next stage of your finish. These dyes are compatible with most known finishes and can be intermixed for color matching.

Directions: Surfaces for staining should be sanded as smooth as possible prior to staining. With a wet rag, slightly wet the surface to raise the grain, and re-sand after it has dried. Apply the dye directly by rag to bare wood. Work the dye over the surface to ensure an even color. Do not pour the dye onto the surface as this could cause a darker area, which will be difficult to remove. Allow dye to dry completely (about 30 minutes) before starting the next stage of your finish. Before dying a piece, test for desired color on a piece of scrap or inconspicuous area. Dye can be reapplied for a darker color or thinned down with clean water for a lighter color. Coverage is 32 Square feet per bottle.

Any color can be achieved by mixing the three primary colors accordingly.

A waterborne product which seals stain and waxes in one coat. StaynWax is a combined stain and wax sealer. Used on bare timber and especially recommended for stripper pine or similar substrates. The "antique pine" shade produces an aged effect on new pine, very similar to caustic stripped old pine. StaynWax will give an antique effect, such as stripped pine, when used on new timber.

Product Tip: Briwax Spirit and Water Based Stains can be applied before the StaynWax directly to the timber, if a deeper color is required. For a high sheen finish follow with a Briwax wax polish. Coverage: 50 Square feet per bottle. (Due to freight restrictions, this item can be shipped via UPS Ground Service only)